Pipe Cushions
Sasco Pipe Cushions are ideal for multiple line runs, and mount to Sasco’s standard 1 5/8” wide Strut Channels. They absorb shock and vibration, reduce noise and avoid galvanic corrosion. The TPE (thermoplastic elastomer) living hinge allows for quick installation and relocation of the cushion and pipe.
- Absorbs shock and vibration.
- Prevents galvanic corrosion of dissimilar metals.
- TPE (thermoplastic elastomer) will not corrode and is non-conducting.
- TPE has a temperature range of -50 to 275 °F (
-46 to 135 °C). - Resists the effects of most oils, chemicals and industrial cleaners.
Sasco Pipe Cushion Installation:
Align pipe and cushion
Insert clamp into Strut
Tighten using nut
This product comes in the following finishes:
Product Suffix:Pre-Galvanized (Standard) G
Hot Dip Galvanized HG
Stainless Steel Type 316 SS
Aluminum AL
Add finish to Catalogue Prefix for Part No.
(S0250PC-SS).
Standard Finish is defined by the suffix shown while other finishes are also shown. Many of these other finishes are stocked, however some may require custom manufacturing.
|
Catalogue |
Copper & |
Copper Water |
Nominal Pipe |
A |
B |
C |
D |
| Dia. (In) | (In) | (In) | (In) | (In) | (In) | (In) | |
| S0250PC | 1/4 | - | - | 0.25 | 0.62 | 0.27 | 0.98 |
| S0375PC | 3/8 | 1/4 | - | 0.37 | 0.82 | 0.33 | 1.13 |
| S0500PC | 1/2 | 3/8 | - | 0.50 | 0.94 | 0.40 | 1.34 |
| S0540PC | - | - | 1/4 | 0.54 | 0.98 | 0.43 | 1.34 |
| S0625PC | 5/8 | 1/2 | - | 0.62 | 1.06 | 0.46 | 1.54 |
| S0675PC | - | - | 3/8 | 0.67 | 1.13 | 0.49 | 1.54 |
| S0750PC | 3/4 | 5/8 | - | 0.75 | 1.20 | 0.52 | 1.68 |
| S0875PC | - | - | 1/2 | 0.84 | 1.29 | 0.58 | 1.82 |
| S0875PC | 7/8 | 3/4 | - | 0.87 | 1.31 | 0.58 | 1.82 |
| S1000PC | 1 | - | - | 1.00 | 1.44 | 0.65 | 1.95 |
|
S1050PC |
- | - | 3/4 | 1.05 | 1.57 | 0.70 | 2.08 |
|
S1125PC |
1 1/8 | 1 | - | 1.12 | 1.57 | 0.70 | 2.08 |
|
S1250PC |
1 1/4 | - | - | 1.25 | 1.70 | 0.77 | 2.21 |
|
S1310PC |
- | - | 1 | 1.31 | 1.76 | 0.81 | 2.34 |
|
S1375PC |
1 3/8 | 1 1/4 | - | 1.37 | 1.82 | 0.83 | 2.34 |
|
S1500PC |
1 1/2 | - | - | 1.50 | 1.95 | 0.90 | 2.47 |
|
S1625PC |
1 5/8 | 1 1/2 | - | 1.62 | 2.07 | 0.96 | 2.60 |
|
S1660PC |
- | - | 1 1/4 | 1.66 | 2.17 | 0.99 | 2.73 |
|
S1750PC |
1 3/4 | - | - | 1.75 | 2.20 | 1.02 | 2.73 |
|
S1875PC |
1 7/8 | - | - | 1.90 | 2.32 | 1.09 | 2.86 |
|
S2000PC |
2 | - | - | 2.00 | 2.45 | 1.15 | 3.04 |
|
S2125PC |
2 1/8 | 2 | - | 2.12 | 2.57 | 1.27 | 3.23 |
|
S2375PC |
2 3/8 | - | 2 | 2.37 | 2.82 | 1.41 | 3.67 |
|
S2500PC |
2 1/2 | - | - | 2.50 | 2.94 | 1.46 | 3.79 |
|
S2625PC |
2 5/8 | 2 1/2 | - | 2.62 | 3.07 | 1.53 | 3.92 |
|
S2875PC |
2 7/8 | - | 2 1/2 | 2.87 | 3.32 | 1.66 | 4.17 |
|
S3000PC |
3 | - | - | 3.00 | 3.57 | 1.78 | 4.42 |
|
S3125PC |
3 1/8 | 3 | - | 3.12 | 3.57 | 1.78 | 4.42 |
|
S3500PC |
3 1/2 | - | 3 | 3.50 | 3.95 | 1.97 | 4.79 |
|
S3625PC |
3 5/8 | 3 1/2 | - | 3.62 | 4.20 | 2.03 | 5.11 |
|
S4000PC |
4 | - | 3 1/2 | 4.00 | 4.45 | 2.28 | 5.11 |
|
S4125PC |
4 1/8 | 4 | - | 4.12 | 4.57 | 2.34 | 5.54 |
|
S4500PC |
4 1/2 | - | 4 | 4.50 | 4.95 | 2.53 | 5.92 |
|
S5125PC |
5 1/8 | 5 | - | 5.12 | 5.57 | 2.84 | 6.54 |
Note: 1.00 in = 25.40 mm